The BMS 200, 500 and 800 are designed for high-performance server clustering and the service-provider-critical application of terminating PPPoE sessions. Multifunction front-panel LEDs offer at-a-glance notification of CPU, chassis, and environment thermal status. ServPoET BMS solutions provide high-density PPPoE termination that minimizes rack utilization and power consumption. ServPoET BMS 200, 500, and 800 can terminate 1000, 3000, and 6000 simultaneous sessions, respectively, in only 1U of rack space. The ServPoET BMS solution is also only 16" deep - half the depth of a traditional rack.
ServPoET BMS is the most economical PPPoE termination solution on the market. ServPoET`s proprietary SmartCluster technology lets you seamlessly add ServPoET capacity as you grow your service.

Small Form Factor

Up to 6000 simultaneous subscriber sessions in 1U of rack space, and is only 16" deep, half the depth of a standard rack.

Easy upgrade

From 1000 simultaneous subscriber sessions to 6000 in a single 1U form factor as well as for new releases of the ServPoET Network Operating System(NOS).

Multiple protocol Encapsulation Suport

Point to Point Protocol over Ethernet (PPPoE), Point to Point Protocol over Ethernet over ATM (PPPoEA), Point to Point Protocol over ATM (PPPoA), Bridged ATM (1483/2684) over Ethernet, Layer 2 Tunneling Protocol (L2TP, LAC/LNS), and 802.1q (Tagged VLAN), allowing for multiple different types of subscriber aggregation.

MODEL BMS 200
Processor:
Operating System:
Memory:
Hard Drive Configuration:
1st Hard Drive:
Network Adapters:
Optional Interfaces
Keyboard:
Mouse:
Monitors:		 Intel Pentium 4, 2.4GHz
ServPoET NOS
512mb DDR, 266MHZ,2X256 DIMM
C1, Motherboard IDE, Ascending Order,
128 Flash RAM IDE Hard Drive
Intel Pro 1000MT Gigabit Dual Port NIC
None
No Keyboard
No Mouse Option
No Monitor Option
Chassis  
Form Factor:
Height:
Width:
Depth:
Weight:
Configuration:		 1U
4.2 cm (1.68 in)
42.42 cm (16.7 in)
55.5 cm (21.9 in)
27 lbs
No Rails Included
Ports  

Rear:

Front:

 1 9-pin serial, Video, PS/2 mouse, PS/2
keyboard, ID push button with
blue/amber LED
ID push button with blue/amber LE
Other  
Power
Graphics		 1 x 230W (non-redundant), 110/220 Volts
On-board video ATI Rage XL
Environmental  
Operating Temperature:
Operating Relative Humidity:
Operating Maximum
Vibration:
Operating Maximum Shock:
Operating Altitude:
Storage Temperature:
Storage Relative Humidity:
Storage Maximum Vibration:
Storage Maximum Shock:
Storage Altitude:		 10º C to 35º C (50º F to 95º F)
8% to 80% (non-condensing)
0.25G at 3Hz to 300Hz for 15 minutes
5G for 11ms
-16m to 3,048m (-50 ft to 10,000 ft)
-40º C to 65º C (-40º F to 149º F)
5% to 95% (non-condensing)
0.5G at 3Hz to 300Hz for 15 minutes
20G with a velocity change of
1397mm/sec
-16m to 10,600m (-50 ft to 35,000 ft)
Regulatory  
  FCC (U.S. only) Class A
DOC (Canada) Class A
CE Mark (EN 55022 Class A, EN55024,
EN61000-3-2, EN61000-3-3, EN60950)
VCCI Class A UL 1950 CSA 950 EN 60950
IEC 60950


MODEL BMS 500
Processor:
Operating System:
Memory:
Hard Drive Configuration:
1st Hard Drive:
Network Adapters:
Optional Interfaces
Keyboard:
Mouse:
Monitors:		 Intel Pentium 4, 2.4GHz
ServPoET NOS
1.0GB DDR, 266MHZ,2X512 DIMM C1,
Motherboard IDE, Ascending Order, 1 HD
128 Flash RAM IDE Hard Drive
Intel Pro 1000MT Gigabit Dual Port NIC
DS3, OC3, OC-12
No Keyboard
No Mouse Option
No Monitor Option
Chassis  
Form Factor:
Height:
Width:
Depth:
Weight:
Configuration:		 1U
4.2 cm (1.68 in)
42.42 cm (16.7 in)
55.5 cm (21.9 in)
27 lbs
No Rails Included
Ports  

Rear:

Front:

 1 9-pin serial, Video, PS/2 mouse, PS/2
keyboard, ID push button with
blue/amber LED
ID push button with blue/amber LED
Other  
Power
Graphics		 1 x 230W (non-redundant), 110/220 Volts
On-board video ATI Rage XL
Environmental  
Operating Temperature:
Operating Relative Humidity:
Operating Maximum
Vibration:
Operating Maximum Shock:
Operating Altitude:
Storage Temperature:
Storage Relative Humidity:
Storage Maximum Vibration:
Storage Maximum Shock:
Storage Altitude:		 10º C to 35º C (50º F to 95º F)
8% to 80% (non-condensing)
0.25G at 3Hz to 300Hz for 15 minutes
5G for 11ms
-16m to 3,048m (-50 ft to 10,000 ft)
-40º C to 65º C (-40º F to 149º F)
5% to 95% (non-condensing)
0.5G at 3Hz to 300Hz for 15 minutes
20G with a velocity change of
1397mm/sec
-16m to 10,600m (-50 ft to 35,000 ft)
Regulatory  
  FCC (U.S. only) Class A
DOC (Canada) Class A
CE Mark (EN 55022 Class A, EN55024,
EN61000-3-2, EN61000-3-3, EN60950)
VCCI Class A UL 1950 CSA 950 EN 60950
IEC 60950


MODEL BMS 800
Processor:
Operating System:
Memory:
Hard Drive Configuration:
1st Hard Drive:
Network Adapters:
Optional Interfaces
Keyboard:
Mouse:
Monitors:		 Intel Pentium 4, 2.4GHz
ServPoET NOS
2.0GB DDR, 266MHZ,2X1GB DIMM
C1, Motherboard IDE, Ascending Order,
128 Flash RAM IDE Hard Drive
Intel Pro 1000MT Gigabit Dual Port NIC
DS3, OC3, OC-12
No Keyboard
No Mouse Option
No Monitor Option
Chassis  
Form Factor:
Height:
Width:
Depth:
Weight:
Configuration:		 1U
4.2 cm (1.68 in)
42.42 cm (16.7 in)
55.5 cm (21.9 in)
27 lbs
No Rails Included
Ports  

Rear:

Front:

 1 9-pin serial, Video, PS/2 mouse, PS/2
keyboard, ID push button with
blue/amber LED
ID push button with blue/amber LED
Other  
Power
Graphics		 1 x 230W (non-redundant), 110/220 Volts
On-board video ATI Rage XL
Environmental  
Operating Temperature:
Operating Relative Humidity:
Operating Maximum
Vibration:
Operating Maximum Shock:
Operating Altitude:
Storage Temperature:
Storage Relative Humidity:
Storage Maximum Vibration:
Storage Maximum Shock:
Storage Altitude:		 10º C to 35º C (50º F to 95º F)
8% to 80% (non-condensing)
0.25G at 3Hz to 300Hz for 15 minutes
5G for 11ms
-16m to 3,048m (-50 ft to 10,000 ft)
-40º C to 65º C (-40º F to 149º F)
5% to 95% (non-condensing)
0.5G at 3Hz to 300Hz for 15 minutes
20G with a velocity change of
1397mm/sec
-16m to 10,600m (-50 ft to 35,000 ft)
Regulatory  
  FCC (U.S. only) Class A
DOC (Canada) Class A
CE Mark (EN 55022 Class A, EN55024,
EN61000-3-2, EN61000-3-3, EN60950)
VCCI Class A UL 1950 CSA 950 EN 60950
IEC 60950